产品特性:注塑级 | 是否进口:否 | 产地:美国科腾 |
厂家(产地):美国科腾 | 牌号:G1643 | 销售方式:品牌经销 |
类型:标准料 | 品名:SEBS | 加工级别:注塑级 |
特性级别:标准级 | 用途级别:通用级 | 品牌:美国科腾 |
KRATON? G1643 M
苯乙烯-乙烯-丁烯-苯乙烯嵌段共聚物
Kraton Polymers LLC
产品说明:
Kraton G1643 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 20%. It is supplied from North America in the physical form identified below.
Kraton G1643 MS - is supplied as a dusted, dense pellet.
Kraton G1643 M is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.
基本信息 | |
---|---|
添加剂 |
|
特性 |
|
用途 |
|
外观 |
|
形式 |
|
加工方法 |
|
物理性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
比重 | 0.900 | g/cm? | ASTM D792 |
熔流率(熔体流动速率) (230°C/2.16 kg) | 14 到 25 | g/10 min | ASTM D1238 |
Antioxidant Additive 1 | 0.060 到 0.14 | % | 内部方法 |
Polystyrene Content | 17 到 21 | % | 内部方法 |
Total Extractables | % | 内部方法 | |
灰份含量 - S, Silica | 0.020 到 0.12 | % | 内部方法 |
挥发物 | % | 内部方法 | |
溶液粘度 - Toluene, 25%wt (25°C) | 210 | mPa·s | 内部方法 |
补充信息 | 额定值 | ||
---|---|---|---|
Styrene/Rubber ratio | 20/80 |
硬度 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
肖氏硬度 (邵氏 A, 30 秒) | 52 | ASTM D2240 |
弹性体 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
抗张强度 (屈服) | > 10.3 | MPa | ASTM D412 |
伸长率 (断裂) | > 600 | % | ASTM D412 |